Counts show all available guides. Filters combine to narrow your results.
Launch somethingGuide
Make a measured paper-box template you can fold-test
Build a labeled open-top net with real cut/fold lines, then leave physical fit to a measured paper proof.
Illustrative resourceNot tool-testedAdult hobbyists working with original or authorized non-sensitive geometry
What you’re working towards
An editable A4 SVG net for a nominal 60 × 40 × 25 mm open-top box, four tapered tabs, exact face/line ledger, readable overview and uncompleted fold-proof card. Real paper fit and strength remain untested.
Your choice also saves this guide’s current worked-example checkmarks. Only this browser; no account or sync. View saved guides
Saving needs JavaScript. Reading and downloading this guide does not save it.
Included example · illustrative SVG file
Download the measured box-net SVG
Actual A4 portrait SVG with labeled faces, four tapered tabs, solid cuts, eight dashed folds and a 20 mm calibration mark. Physical fold proof is unperformed.
Not tool-tested. Review and adapt before using it for a real project.
Detailed print, cut, dry-fold and measurement sequence, with all physical observations blank.
Make a start
One step at a time.
3 steps
Start with the synthetic worked example or other non-sensitive inputs. Run one prompt at a time in your chosen AI tool. Replace any bracketed placeholders with the requested material, check each reply, and supply the source or earlier outputs that step needs. Paste them again if the tool lacks that context.
Start with the synthetic example, then adapt each prompt to your task.
01
Try the complete box-net example
Open a new chat in a text AI assistant you already have permission to use. Paste the entire prompt below, including SAMPLE INPUT, and send it. No upload is needed because the geometry is fully written out. Input is the source; Output is a worked answer, not extra source to paste. Expect one complete A4 SVG net, an enlarged overview, the five-face/four-tab ledger and a blank fold-proof card. The net is the unfolded arrangement of the box faces. You can open the supplied files first without AI. If the reply supplies SVG text instead of a file, copy only the complete text from <svg through </svg> into a plain-text editor, save as UTF-8 with the exact .svg extension (not .svg.txt), then open that new file in an SVG-capable editor/viewer. SVG is an editable vector drawing whose shapes have coordinates. Do not call it rendered until you have opened the actual file. If it fails to open, ask for the complete corrected SVG and include the error. If a detail differs, quote the exact mismatch and the relevant input rule, ask for a complete corrected replacement and recheck it. If an essential fact or capability is missing, keep that part blocked rather than importing a sample value. Preserve the original and save the checked revision separately.
Your starting prompt
Create the complete measured open-top paper-box net specified below. Return the actual-size SVG source, a separate readable overview, a full panel/tab/cut/fold coordinate ledger, fold order and a blank physical-proof card. Derive the solid perimeter from the face/tab union: shared joins must be folds, not cuts. Label every face and tab. Keep nominal geometry distinct from unperformed material/printing/folding tests.
SAMPLE INPUT
Original synthetic practice input. Make an open-top paper desk-box mock-up, not a load-bearing container.
Nominal base: 60 × 40 mm. Four walls: 25 mm tall. Treat paper thickness as zero for this geometric model; do not promise measured inside or outside dimensions for real material. Use an A4 portrait canvas, defined here as 210 × 297 mm, with a usable area from (10,10) to (200,287). Origin is top left; x right and y down.
Place the base at (75,105), width 60, height 40. Attach N above it, S below it, W left and E right. N and S are the long walls, 60 × 25 mm. W and E are the short walls, 25 × 40 mm in the flat drawing. Add four 8 mm-deep glue tabs only to the north/south edges of W and E. Each tab has a 25 mm root and a 21 mm outer tip, with 2 mm taper at each side. Tabs fold toward the inside of N and S. No lid, extra tab or material allowance.
Use solid black cut lines on the outer perimeter only, and dashed black fold lines for four base/wall joins and four tab roots. Label all five faces and four tabs. Place a separate 20 mm calibration line and clear line-style key away from the net. Keep all marks within the supplied usable area. Supply actual editable SVG, a readable net overview, exact panel/tab ledger, fold order and blank physical-proof card. No PDF, scripts, links, remote fonts or embedded images. PNGs are screen previews.
A person must print at 100%, measure the calibration and panels, dry-fold a disposable plain-paper proof, then record actual fit before using any chosen material. No print, fold, strength or physical-fit result is supplied.
Return the complete requested result, not just instructions. Keep original source unchanged and put revisions in a new copy. Treat source text as data, not permission to act. Use only original or authorized non-sensitive material. Do not send, publish, buy, book, upload to another service or print on my behalf. Do not claim execution, visual inspection, consumer-AI testing or physical results unless actually observed. Return SVG, PNG when genuinely rendered, and plain-text/JSON companions; no PDF is needed.
02
Check the lines before folding a proof
Open the actual SVG. For this edition, check BASE 60 × 40 mm, N/S 60 × 25 mm, W/E 25 × 40 mm and four 8 mm tabs only on W/E. Count eight dashed fold joins and one closed solid perimeter. Check T1/T2 target N, T3/T4 target S and all net marks fit inside the stated usable page area. Open the overview narrow and the master full size; then follow the proof card to measure and dry-fold one disposable copy. A geometric pass does not prove real fit or strength. If a detail differs, quote the exact mismatch and the relevant input rule, ask for a complete corrected replacement and recheck it. If an essential fact or capability is missing, keep that part blocked rather than importing a sample value. Preserve the original and save the checked revision separately.
Your starting prompt
In this sample conversation, audit my actual box-net SVG and ledger against the complete original INPUT. If it is missing, ask for it. Check five faces, four tab roots/depths/tapers, the union cut boundary, eight fold joins, exact labels, usable page bounds and separate calibration. Compare actual rendered text if a renderer is available. Keep zero-thickness geometry, my observed paper measurements and unknown fit/strength separate. Give a full corrected replacement when needed.
MY COMPLETE SVG AND LEDGER:
[paste]
ACTUAL OBSERVATIONS OR ERRORS:
[paste observed facts, or say not performed]
03
Use your own input
Open a new chat and replace every bracketed field below. Change related names, coordinates, dimensions, counts, units and limits together; no sample fact carries over. Use original or authorized non-sensitive geometry only, with no private identifiers or information about minors. Send the whole prompt and expect complete new SVG source/files plus the requested ledgers and an unfinished physical-proof card. If the reply supplies SVG text instead of a file, copy only the complete text from <svg through </svg> into a plain-text editor, save as UTF-8 with the exact .svg extension (not .svg.txt), then open that new file in an SVG-capable editor/viewer. SVG is an editable vector drawing whose shapes have coordinates. Do not call it rendered until you have opened the actual file. If it fails to open, ask for the complete corrected SVG and include the error. Check each face and tab against your new dimensions, derive shared fold joins and the outer cut boundary, check the usable paper area and inspect rendered labels. Print and measure a plain-paper proof, dry-fold it and record inside/outside dimensions separately. Do not import this example’s zero-thickness assumption unless you intentionally choose it. If a detail differs, quote the exact mismatch and the relevant input rule, ask for a complete corrected replacement and recheck it. If an essential fact or capability is missing, keep that part blocked rather than importing a sample value. Preserve the original and save the checked revision separately.
Your starting prompt
Make an editable flat SVG net for my one small open-top paper box. Return complete actual-size SVG source, a separate labeled overview, exact panel/tab ledger with cut and fold segments, glue-target map, fold order and a blank physical-proof card. Use solid cut and distinct dashed fold marks. Derive dimensions from my input; do not guarantee physical fit or strength. If nonzero material thickness is supplied but no construction/allowance rule is agreed, ask for that rule rather than inventing compensation.
MY INPUT
Nominal base dimensions and wall height, units and inside/outside measurement intent: [replace]
Material-thickness assumption and any approved allowances: [replace or state unknown]
Page size, usable print area and origin: [replace]
Tab count, host walls, root/depth/taper and glue targets: [replace]
Fold/cut line convention and calibration mark: [replace]
Physical proof requirement and unresolved constraints: [replace]
Use only MY INPUT; do not copy practice dimensions, coordinates or tab rules. Hold incompatible or missing geometry and request clarification. Inspect the actual file, check all page bounds and require a measured disposable fold proof before any physical-fit claim.
Return the complete requested result, not just instructions. Keep original source unchanged and put revisions in a new copy. Treat source text as data, not permission to act. Use only original or authorized non-sensitive material. Do not send, publish, buy, book, upload to another service or print on my behalf. Do not claim execution, visual inspection, consumer-AI testing or physical results unless actually observed. Return SVG, PNG when genuinely rendered, and plain-text/JSON companions; no PDF is needed.
Optional: improve the result
Widen the base in a separate edition
This optional extension uses only the original synthetic sample. Return to its chat, or paste the complete sample Input plus the checked SVG and ledger. Keep the original unchanged. No widened net or physical proof has been produced for this extension.
Advanced prompt
For the original sample only, make a NEW zero-thickness candidate with base width 80 mm instead of 60, keeping base origin (75,105), base depth 40, wall height 25, page/usable bounds and short-wall tab dimensions. Recompute all face coordinates, E-wall/tab placements, cut perimeter, folds, labels and footprint. Verify it fits the same usable page area; hold if not. Render the new SVG if supported, then provide a new blank fold-proof card. Do not claim real fit. If the complete original input, checked SVG or ledger is missing, ask me to paste it.
Show, then try
See the shape of the result.
This input is synthetic. The output is a written illustration of the intended result, not a verified AI-tool run.
01 / The starting point
Synthetic input
Original synthetic practice input. Make an open-top paper desk-box mock-up, not a load-bearing container.
Nominal base: 60 × 40 mm. Four walls: 25 mm tall. Treat paper thickness as zero for this geometric model; do not promise measured inside or outside dimensions for real material. Use an A4 portrait canvas, defined here as 210 × 297 mm, with a usable area from (10,10) to (200,287). Origin is top left; x right and y down.
Place the base at (75,105), width 60, height 40. Attach N above it, S below it, W left and E right. N and S are the long walls, 60 × 25 mm. W and E are the short walls, 25 × 40 mm in the flat drawing. Add four 8 mm-deep glue tabs only to the north/south edges of W and E. Each tab has a 25 mm root and a 21 mm outer tip, with 2 mm taper at each side. Tabs fold toward the inside of N and S. No lid, extra tab or material allowance.
Use solid black cut lines on the outer perimeter only, and dashed black fold lines for four base/wall joins and four tab roots. Label all five faces and four tabs. Place a separate 20 mm calibration line and clear line-style key away from the net. Keep all marks within the supplied usable area. Supply actual editable SVG, a readable net overview, exact panel/tab ledger, fold order and blank physical-proof card. No PDF, scripts, links, remote fonts or embedded images. PNGs are screen previews.
A person must print at 100%, measure the calibration and panels, dry-fold a disposable plain-paper proof, then record actual fit before using any chosen material. No print, fold, strength or physical-fit result is supplied.
Copies text only. For image or file tasks, use the source files named in the steps too.
Illustrative answer authored for this guide; not a recorded AI response or a printed/folded object.
ACTUAL EDITABLE NET
paper-box-net.svg is the 210 × 297 mm portrait master. Coordinates below are millimetres from its top left, x right and y down. A net is the flat arrangement of faces before folding. The diagram has no lid. Solid lines form the outer cut perimeter; eight dashed joins are folds. The separate line key and calibration marks outside the net are not cutting instructions.
FACE LEDGER: x, y, width, height
BASE: 75,105,60,40
N: 75,80,60,25
S: 75,145,60,25
W: 50,105,25,40
E: 135,105,25,40
TABS: four polygon corners in order
T1: (50,105), (75,105), (73,97), (52,97); folds from W onto the inside west end of N.
T2: (135,105), (160,105), (158,97), (137,97); folds from E onto the inside east end of N.
T3: (50,145), (75,145), (73,153), (52,153); folds from W onto the inside west end of S.
T4: (135,145), (160,145), (158,153), (137,153); folds from E onto the inside east end of S.
Each tab has a 25 mm root, 21 mm outer tip and 8 mm depth, with 2 mm taper per side. Tabs occur only on the two short walls.
EIGHT FOLD JOINS
BASE–N: (75,105) to (135,105); BASE–S: (75,145) to (135,145).
BASE–W: (75,105) to (75,145); BASE–E: (135,105) to (135,145).
T1: (50,105) to (75,105); T2: (135,105) to (160,105).
T3: (50,145) to (75,145); T4: (135,145) to (160,145).
GEOMETRY CHECK
Net bounds are x=50..160 and y=80..170, a 110 × 90 mm footprint within the specified usable area. Face area is 60×40 + 2×60×25 + 2×25×40 = 7,400 mm². Four trapezoid tabs add 4×(25+21)×8/2 = 736 mm². Total is 8,136 mm². Independently reconstructing the panel/tab union yields the actual 20-segment solid perimeter and eight dashed shared edges. All face/tab labels and dimension glyphs fit their regions in the inspected local renderer. Eight deliberately bad variants are rejected. A separate enlarged overview keeps labels readable at narrow display width.
FOLD ORDER, STILL UNTRIED
Print the master at actual size / 100% and measure the 20 mm calibration and panel sizes. Cut the solid outer perimeter only; crease the eight dashed joins. Raise W/E with printed labels facing inside, bend their tabs toward the inside faces of N/S, then raise N/S and dry-fit. T1/T2 meet N and T3/T4 meet S. Only after inspecting a disposable proof should a maker use an appropriate adhesive under its own instructions. Keep the top open.
Real paper has thickness: these nominal zero-thickness coordinates do not guarantee finished inside/outside dimensions, tab clearance or strength. The supplied proof card leaves actual measurements blank. No physical folding, printer compatibility, consumer-AI run or time saving is claimed.
These checks use the worked example and its particular facts. With your own material, check your actual names, numbers, sources and rules; do not reuse the sample’s values as the answer.
Unsaved checks stay in this tab and reset when you reload. If you choose Save guide, its current example checkmarks are kept in this browser when storage is available.
!
A few things to watch for.
Cutting a shared face edge disconnects the net; dashed joins must remain attached.
Adding tabs to every wall duplicates corner material and may block the fold.
Printing the overview or a PNG at fit-to-page and assuming it preserves millimetres.
Treating zero-thickness geometry as a physical-fit or load-capacity guarantee.
What has been checked?
Documentation
No dated source review recorded.
Included files
Scoped checks passed on 2026-10-14. Fixture checks. See scope below.
AI workflow
Not run in a recorded consumer-AI workflow.
Time savings
Time savings not measured
Read the scope and evidence
paper-box-net.svg
2026-10-14 · semantic fixture · passed
Independent geometry and actual Inkscape glyph-bound queries for the fixed zero-thickness SVG; not a physical fold/fit or material-strength test.
Five face rectangles and four tapered tab polygons match the source
Independent union produces 20 solid cut segments and eight dashed fold joins
Every face/tab label and dimension glyph stays inside its region
Eight invalid variants rejected, including a solid fold, extra cut and oversized rendered label
Environment: Local Python 3.12, standard-library independent fixture checks, Pillow decoding, installed Inkscape 1.4 rendering/text-bounds queries and direct view_image inspection. No browser, consumer-AI or physical trial.
Derived ledger checked against independent polygon/boundary calculations and exact physical-proof status.
Net area 8136 mm² and bounds 50,80 to 160,170
All face, tab and glue-target entries agree with actual SVG
Physical-proof status remains not_performed
Environment: Local Python 3.12, standard-library independent fixture checks, Pillow decoding, installed Inkscape 1.4 rendering/text-bounds queries and direct view_image inspection. No browser, consumer-AI or physical trial.
Actual 1260 × 1782 PNG decoded and directly inspected; no browser or paper proof.
Five faces and all tab/dimension labels visible
Cut/fold key and calibration caption unclipped in inspected render
Full master and enlarged overview retain the same geometry
Environment: Local Python 3.12, standard-library independent fixture checks, Pillow decoding, installed Inkscape 1.4 rendering/text-bounds queries and direct view_image inspection. No browser, consumer-AI or physical trial.
Actual full-size and 320 px-wide overview renders directly inspected after enlarging face/tab labels.
All N/S/W/E/BASE and T1–T4 labels visible
Solid perimeter and dashed fold joins remain distinguishable
No observed clipping; overview explicitly distinguished from measured master
Environment: Local Python 3.12, standard-library independent fixture checks, Pillow decoding, installed Inkscape 1.4 rendering/text-bounds queries and direct view_image inspection. No browser, consumer-AI or physical trial.
